I-Tech Series

I-Tech

New! I-Tech Drop Test Video

Power Output
 
Dual
Bridge
2 Ohm
4 Ohm
8 Ohm
4 Ohm
8 Ohm
20 msec BURST
1 kHz
20 Hz -
20 kHz
20 Hz -
20 kHz
20 Hz -
20 kHz
20 Hz -
20 kHz
20 Hz -
20 kHz
I-T4000
2,565
1,800
1,800
2,000
1,250
3,600
4,000
I-T6000
4,570
2,500
2,500
3,000
1,500
5,000
6,000
I-T8000
5,900
3,500
3,500
4,000
2,100
7,000
8,000
Guaranteed minimum power in watts with 0.35% THD

Touring sound. Earth-shattering performance. I-Tech's patented class-I technology is the number one choice of touring professionals worldwide.

  • Global Power Supply – designed to deliver maximum power no matter where your
    schedule takes you
  • Studio Quality Processing – integrated processing reduces DSP noise for a quieter
    overall system
  • Peak voltage and RMS power limiting protects your speaker investment
  • Front panel LCD provides diagnostics and preset selection to ensure fast and
    easy system setup
  • Front panel lockout – ensures that tunings and presets are safely stored and protected
    from curious users
  • Remote monitoring and control for complete system control anywhere in the venue

HiQnet™

For product availability and pricing please contact your local dealer.

Performance
I-T4000
I-T6000
I-T8000
Input Sensitivity (volts RMS) for rated output
Adjustable in 0.1V steps from 1.4V to 7.75V
Voltage Gain for full rated power at 8 ohms
37.1 dB to 22.2 dB
37.9 dB to 23.0 dB
39.3 dB to 24.5 dB
Frequency Response (at 1 watt, 20Hz - 20 kHz)
± 0.25 dB
Signal to Noise Ratio below rated full-bandwidth power, A-weighted
> 105 dB
Total Harmonic Distortion (THD) at full rated power
< 0.35%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –35 dB
< 0.35%
Maximum Input Level
+15 dBu or +21 dBu, depending on setting of maximum input level
Latency (analog, digital inputs)
Analog: 1.13 mS. Digital: See Sample Rate / Latency Table below.
A/D, D/A Converters
24-bit 96 kHz Cirrus Logic
Digital Input
AES/EBU, 24-bit, 32-96 kHz. Onboard sample rate converter.
Network
Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware
DSP
24-bit conversion with 32-bit, floating-point DSP processing
Attenuators
Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to –100 dB.
Damping Factor (8 ohms): 20 Hz to 100 Hz
> 5000
Crosstalk (below rated power, 20 Hz to 1 kHz)
> 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz)
> 50 dB
DC Output Offset (Shorted input)
< ± 3 mV
Input Impedance (nominal)
20 kilohms balanced, 10 kilohms unbalanced
Load Impedance (Note: Safe with all types of loads)
Stereo
Bridge Mono
1-2-4-8-16 ohms
2-4-8 ohms
Required AC Mains
Universal AC input, 100-240VAC (±15%), 50/60 Hz. Max. AC mains voltage 277VAC.
AC Line Connector
USA, UK, European, Australia, India
Construction
All Models
Ventilation
Flow-through ventilation from front to back
Cooling
Dual-zone, microprocessor controlled, continuously variable speed fans
Dimensions
EIA Standard 19-inch rack mount width (EIA RS-310B), 3.5-inch (8.9-cm) height, 16.2-inch (41.1-cm) depth behind front mounting surface
Weight
Net
Shipping
28 pounds (12.7 kg)
36 pounds (16.3 kg)
Harman Pro Group AKG Acoustics BSS Audio dbx Pro JBL Professional Lexicon Pro Soundcraft Studer HiQnet™

Search | Site Map | Site Help | Trademark Notice | Terms Of Use | Privacy Policy

Copyright © 2002 - Crown Audio®, Inc.
Harman International