XTi Series
| Minimum Guaranteed Power, 1 kHz |
XTi 1000 |
XTi 2000 |
XTi 4000 |
| Per channel, both channels driven |
Stereo, 2 ohms (per ch.)
Stereo, 4 ohms (per ch.)
Stereo, 8 ohms (per ch.)
Bridge-Mono, 4 ohms
Bridge-Mono, 8 ohms |
700W*
500W
275W
1400W*
1000W |
1000W*
800W
475W
2000W*
1600W |
1600W*
1200W
650W
3200W*
2400W |
With 0.5% THD.
*With 1% THD
|
The XTi Series of Crown amplifiers are professional tools designed and built for portable PA applications. The series includes three models which are identical except for output power: XTi 1000, 2000 and 4000. All are rugged and lightweight, and offer unmatched value in their class.
- Integrated proprietary DSP with LCD front panel display
- Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
- Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
- Extremely versatile, handling a wide range of speaker impedances and outputs
- Switch-mode universal power supply
- Speaker presets for crossover frequencies, EQ, limiting, and delay
- All products fill 2U rack spaces and weigh under 17 pounds; weight sets a new standard in lightweight amps (20% less)
- Speakon® and binding post outputs, XLR inputs and loop-thrus
- Comprehensive LED status per channel
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
For product availability and pricing please contact your local dealer.
|
|
Specifications
| Sensitivity (volts RMS) for full rated power at 4 ohms |
1.4V |
| Frequency Response (at 1 watt into 4 ohms,
20Hz - 20 kHz) |
+0/–1 dB |
| Signal to Noise Ratio (below rated 1 kHz power at 8
ohms), A-weighted |
100 dB |
| Damping Factor (8 ohm): 20 Hz to 400 Hz |
> 500 |
| Input Stage |
Input is electronically balanced and employs
precision 1% resistors. |
| AC Line Current |
XTi 1000: 6.5A, XTi 2000: 6.9A, XTi 4000: 8.0A.
At idle: Draws no more than 90 watts. |
| Crosstalk (below rated power)
20 Hz to 1 kHz |
> 70 dB |
| Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced |
Load impedance (note: safe with all types of loads)
Stereo
Bridge mono |
2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions)
4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions) |
| Voltage Gain (at 1 kHz, 8 ohm rated output) |
XTi 1000: 30.5 dB. XTi 2000: 32.9 dB.
XTi 4000: 34.2 dB |
| Maximum Input Signal |
+22 dBu typical |
| Operating Temperature |
0° C to 40° C at 95% relative humidity
(non-condensing) |
| AC Line Voltage and Frequency Configurations Available (± 10%) |
100V, 120V, 220-240V 50/60 Hz |
| Ventilation |
Flow-through ventilation from front to back |
| Cooling |
Heat sinks and proportional-speed fan |
| Dimensions: Width, Height, Depth
(behind mounting surface) |
EIA Standard 19 in. W (EIA RS-310-B)
x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D |
| Net Weight, Shipping Weight |
18.5 lb (8.4 kg), 21.5 lb (9.8 kg) |
|
|
