Crown Audio by Harman

Search:     Advanced search
Glossary



How should I mike a wedding (2 of 3)

My daughter is getting married soon. What kind of microphone should I get so that the audience can hear the words of the participants?
Mark Moritz

Reply: For the audience to hear the comments, the microphone has to be close to the participants' mouths. A single clip-on mini omni condenser mic (lavalier mic) like a GLM-100 on the minister will pick up him, the bride, and the groom. If you use a GLM-100E mic into a wireless transmitter, ask the minister to turn off the transmitter when not in use. Try this out a few days or weeks ahead of time to make sure it works with your PA system.

As another option, try a cardioid mic (like a CM-200A) on a mic stand close to the participants. If it is too far away, the audience won't hear the words. Try it out ahead of time with your PA system. See how close you can place the mic to the people's mouths without the mic getting in the way.

In either case, set the mixer volume and mark it so that you don't run into feedback during the ceremony.
Others in this Category
document How do I control Blackberry or cellphone interference in MB microphones?
document How do I combine two mics into one input?
document How should I mike a video shoot?
document Which Crown mic works with a sound card?
document Do you have a surface-mounted (boundary) mic with an on-off switch?
document How do I mike a group discusson for recording and PA?
document Can you recommend a sweat-resistant tape for face mics (headworn mics)?
document How should I mike our congregation with PZMs?
document How should I mike a wedding? (1 of 3)
document How should I mike a wedding? (3 of 3)
document How can I pick up ambient stage sound for in-ear monitors?
document Where do I order replacement parts for my Crown headset?
document How can I mike an observation room with a PZM-10?
document Why is it important to use a matched mic pair for stereo recording?
document How can I make a Mid-Side (MS) stereo mic with PZM and PCC mics?
document What mic would you recommend for voiceover and acoustic guitar?
document Where should I place a PZM-11LL to prevent pickup of duct noise?
document What mic should I use for recording a therapy session?
document What mics are good for a video shoot?
document What is a good spy mic to record conversations?
document How can I mike a group discussion for broadcast?
document How do I record students in a classroom?
document How can I prevent feedback with my lectern microphone?
document Is there a replacement for the Crown PS-24 power supply?
document Do you have a wall-mountable or wireless microphone for voice recognition or handicapped use?
document How can I record dialog and ambience for video?
document Please explain mixer connections, equalizers, compressors, and groups.
document I can't hear my monitor speaker.
document How should I use phantom power?
document How do I purchase Crown products?
document How do I return a microphone for factory service?
document How can I make a line-level to mic-level adapter for my camcorder?
document How to mike a tap dancer?
document How to mike a roomful of computer operators?
document Siren indicator for deaf drivers
document Water-resistant microphones
document How to record direct? Please explain impedances and levels.
document Help choosing a headset microphone
document Picking up birds at a nature center
document PZM mounting and waterproofing
document Miking a classical music ensemble
document How do I prevent breath pops with the CM-311A?
document Can the PZM-11LLWR be changed from its line-level output to a mic-level output?
document How to mike students and eliminate background noise?
document Which Crown microphone has a connector that fits a mini digital camcorder?
document Where can I get Crown mic parts and service?
document Clandestine listening room
document I need a mixer for a 3-mic PA system
document Please recommend a paging mic for the Crown 180MA mixer-amp.